Any suggestions on the best reference book to help with building
simple-moderately difficult reports for a beginner? This looks pretty good
but wonder if it might be too advanced 'Hitchhiker's Guide to SQL Server
2000 Reporting Services'
Thanks!I think that the Hitchhiker book is very good. The tone is conversational,
and I have found much of the material to apply to my own real-world
situations. Actually, you can download the first two chapters for free
(http://www.sqlreportingservices.net/BookSrs2000/preview/default.aspx) . You
may want to try it and see if it works for you.
Another good one is Brian Larson's Microsoft SQL Server 2000 Reporting
Services". I am sure that there are other good books besides those, but
these are the two that I am familiar with.
"Mike Harbinger" wrote:
> Any suggestions on the best reference book to help with building
> simple-moderately difficult reports for a beginner? This looks pretty good
> but wonder if it might be too advanced 'Hitchhiker's Guide to SQL Server
> 2000 Reporting Services'
> Thanks!
>
>
Showing posts with label reference. Show all posts
Showing posts with label reference. Show all posts
Tuesday, March 27, 2012
Thursday, February 16, 2012
Behavior of SSIS lookup transform on full cache setting with low computer memory
I would like to know what happens when a very large reference data set for a lookup transform with full caching enabled is getting loaded during package execution and the computer memory runs out or is very low.
Does SSIS
a) give an out of memory error of some sort
b) resort to a no caching or partial caching mode
c) maintain the full caching mode but will switch to using the paging file(virtual memory).
I think it will resort to using the page file in which case the benefits of in memory lookups are lost and performance would suffer. If I cannot upgrade the memory or shrink the reference set somehow, i should switch that lookup task to use partial caching or no caching with an indexed lookup table. Would this make sense?
It won't do B unless you explicitly set it. I think it does C as part of the standard Windows memory management, but you might see A too if you are dealing with large data sets.
Your approach would make sense. I'd start by making sure that you are only caching the bare minimum reference set needed, though.
Monday, February 13, 2012
Beginner question - working with URL variables
I want to default one of my report parameters to a value passed in via the
URL. How do i reference a URL variable in the report designer?
TIA,
BrianThanks for your help Teros. I think I tried what you are suggesting, but
everytime i run the report, passing in the URL variable never seems to have
any affect on the value.
Here's what i got:
Parameter1: This is the variable that i will want to change with a URL
variable, default value is blank, no prompt.
Parameter2: Changeable parameter on the report, defaults to
Parameter1.value.
Then when I call the report, i try passing in a value for Parameter1:
http://127.0.0.1/ReportServer?ReportName&Parameter1=22
The report comes up with Parameter2 still showing blank.
Brian
"Teros" <Teros@.discussions.microsoft.com> wrote in message
news:9A646724-4C92-464B-A4C4-6BE2C6F7A98A@.microsoft.com...
> If you have your url such as:
> http://127.0.0.1/ReportServer?ReportNameX&categoryY=22
> Where ReportNameX is the report and categoryY is your parameter, you
should be able to reference it within your report by setting up a
coresponding parameter named categoryY and then using the usual
Parameters!categoryY.Value . So to have it default that value for a second
parameter, I would think you'd set up your URL passed parameter, then call
that with the Parameters!blah.value in your default value spot for the 2nd
parameter.
> Hope that helps (and works! :) )
> - T
> "G" wrote:
> > I want to default one of my report parameters to a value passed in via
the
> > URL. How do i reference a URL variable in the report designer?
> >
> > TIA,
> > Brian
> >
> >
> >|||That seems ridiculously complicated for something that should be common
practice. Passing a URL variable into a report and manipulating that
variable has to be a trivial task.
I must be doing something wrong, but not a clue what.
> Hmm... Might be that parameters can't control parameters in the same
report? Quick workaround might be to have a "shell" report that brings in
the URL parameter, then have your main report as a subreport in the shell
(taking up the entire space, so it's transparent to the end user) and pass
the second parameter based on the outer first?
> Did that make any sense?
> - T
> "G" wrote:
> > Thanks for your help Teros. I think I tried what you are suggesting, but
> > everytime i run the report, passing in the URL variable never seems to
have
> > any affect on the value.
> >
> > Here's what i got:
> >
> > Parameter1: This is the variable that i will want to change with a URL
> > variable, default value is blank, no prompt.
> > Parameter2: Changeable parameter on the report, defaults to
> > Parameter1.value.
> >
> > Then when I call the report, i try passing in a value for Parameter1:
> > http://127.0.0.1/ReportServer?ReportName&Parameter1=22
> >
> > The report comes up with Parameter2 still showing blank.
> >
> > Brian
> >
> >
> > "Teros" <Teros@.discussions.microsoft.com> wrote in message
> > news:9A646724-4C92-464B-A4C4-6BE2C6F7A98A@.microsoft.com...
> > > If you have your url such as:
> > >
> > > http://127.0.0.1/ReportServer?ReportNameX&categoryY=22
> > >
> > > Where ReportNameX is the report and categoryY is your parameter, you
> > should be able to reference it within your report by setting up a
> > coresponding parameter named categoryY and then using the usual
> > Parameters!categoryY.Value . So to have it default that value for a
second
> > parameter, I would think you'd set up your URL passed parameter, then
call
> > that with the Parameters!blah.value in your default value spot for the
2nd
> > parameter.
> > >
> > > Hope that helps (and works! :) )
> > > - T
> > >
> > > "G" wrote:
> > >
> > > > I want to default one of my report parameters to a value passed in
via
> > the
> > > > URL. How do i reference a URL variable in the report designer?
> > > >
> > > > TIA,
> > > > Brian
> > > >
> > > >
> > > >
> >
> >
> >|||I think that you have the concept of how to do this not quite right. You are
not wanting to reference the variable passed on the url, you want the url to
set the report parameter you have already defined. Steps to get this
working. First create a report with report parameters and make sure the
report is working.
Easiest is just have a blank report with two text boxes. Set the textboxes
as an expression. Using the expression builder you can set it to you
parameter. Open up the report, you will be prompted for a parameter. Fill it
in and make sure the parameter shows up on your report. Now try it via a
URL.
Bruce L-C
"G" <brian.grant@.si-intl-kc.com> wrote in message
news:O5yEaYTWEHA.4056@.TK2MSFTNGP11.phx.gbl...
> That seems ridiculously complicated for something that should be common
> practice. Passing a URL variable into a report and manipulating that
> variable has to be a trivial task.
> I must be doing something wrong, but not a clue what.
>
> > Hmm... Might be that parameters can't control parameters in the same
> report? Quick workaround might be to have a "shell" report that brings in
> the URL parameter, then have your main report as a subreport in the shell
> (taking up the entire space, so it's transparent to the end user) and pass
> the second parameter based on the outer first?
> >
> > Did that make any sense?
> > - T
> >
> > "G" wrote:
> >
> > > Thanks for your help Teros. I think I tried what you are suggesting,
but
> > > everytime i run the report, passing in the URL variable never seems to
> have
> > > any affect on the value.
> > >
> > > Here's what i got:
> > >
> > > Parameter1: This is the variable that i will want to change with a URL
> > > variable, default value is blank, no prompt.
> > > Parameter2: Changeable parameter on the report, defaults to
> > > Parameter1.value.
> > >
> > > Then when I call the report, i try passing in a value for Parameter1:
> > > http://127.0.0.1/ReportServer?ReportName&Parameter1=22
> > >
> > > The report comes up with Parameter2 still showing blank.
> > >
> > > Brian
> > >
> > >
> > > "Teros" <Teros@.discussions.microsoft.com> wrote in message
> > > news:9A646724-4C92-464B-A4C4-6BE2C6F7A98A@.microsoft.com...
> > > > If you have your url such as:
> > > >
> > > > http://127.0.0.1/ReportServer?ReportNameX&categoryY=22
> > > >
> > > > Where ReportNameX is the report and categoryY is your parameter, you
> > > should be able to reference it within your report by setting up a
> > > coresponding parameter named categoryY and then using the usual
> > > Parameters!categoryY.Value . So to have it default that value for a
> second
> > > parameter, I would think you'd set up your URL passed parameter, then
> call
> > > that with the Parameters!blah.value in your default value spot for the
> 2nd
> > > parameter.
> > > >
> > > > Hope that helps (and works! :) )
> > > > - T
> > > >
> > > > "G" wrote:
> > > >
> > > > > I want to default one of my report parameters to a value passed in
> via
> > > the
> > > > > URL. How do i reference a URL variable in the report designer?
> > > > >
> > > > > TIA,
> > > > > Brian
> > > > >
> > > > >
> > > > >
> > >
> > >
> > >
>
URL. How do i reference a URL variable in the report designer?
TIA,
BrianThanks for your help Teros. I think I tried what you are suggesting, but
everytime i run the report, passing in the URL variable never seems to have
any affect on the value.
Here's what i got:
Parameter1: This is the variable that i will want to change with a URL
variable, default value is blank, no prompt.
Parameter2: Changeable parameter on the report, defaults to
Parameter1.value.
Then when I call the report, i try passing in a value for Parameter1:
http://127.0.0.1/ReportServer?ReportName&Parameter1=22
The report comes up with Parameter2 still showing blank.
Brian
"Teros" <Teros@.discussions.microsoft.com> wrote in message
news:9A646724-4C92-464B-A4C4-6BE2C6F7A98A@.microsoft.com...
> If you have your url such as:
> http://127.0.0.1/ReportServer?ReportNameX&categoryY=22
> Where ReportNameX is the report and categoryY is your parameter, you
should be able to reference it within your report by setting up a
coresponding parameter named categoryY and then using the usual
Parameters!categoryY.Value . So to have it default that value for a second
parameter, I would think you'd set up your URL passed parameter, then call
that with the Parameters!blah.value in your default value spot for the 2nd
parameter.
> Hope that helps (and works! :) )
> - T
> "G" wrote:
> > I want to default one of my report parameters to a value passed in via
the
> > URL. How do i reference a URL variable in the report designer?
> >
> > TIA,
> > Brian
> >
> >
> >|||That seems ridiculously complicated for something that should be common
practice. Passing a URL variable into a report and manipulating that
variable has to be a trivial task.
I must be doing something wrong, but not a clue what.
> Hmm... Might be that parameters can't control parameters in the same
report? Quick workaround might be to have a "shell" report that brings in
the URL parameter, then have your main report as a subreport in the shell
(taking up the entire space, so it's transparent to the end user) and pass
the second parameter based on the outer first?
> Did that make any sense?
> - T
> "G" wrote:
> > Thanks for your help Teros. I think I tried what you are suggesting, but
> > everytime i run the report, passing in the URL variable never seems to
have
> > any affect on the value.
> >
> > Here's what i got:
> >
> > Parameter1: This is the variable that i will want to change with a URL
> > variable, default value is blank, no prompt.
> > Parameter2: Changeable parameter on the report, defaults to
> > Parameter1.value.
> >
> > Then when I call the report, i try passing in a value for Parameter1:
> > http://127.0.0.1/ReportServer?ReportName&Parameter1=22
> >
> > The report comes up with Parameter2 still showing blank.
> >
> > Brian
> >
> >
> > "Teros" <Teros@.discussions.microsoft.com> wrote in message
> > news:9A646724-4C92-464B-A4C4-6BE2C6F7A98A@.microsoft.com...
> > > If you have your url such as:
> > >
> > > http://127.0.0.1/ReportServer?ReportNameX&categoryY=22
> > >
> > > Where ReportNameX is the report and categoryY is your parameter, you
> > should be able to reference it within your report by setting up a
> > coresponding parameter named categoryY and then using the usual
> > Parameters!categoryY.Value . So to have it default that value for a
second
> > parameter, I would think you'd set up your URL passed parameter, then
call
> > that with the Parameters!blah.value in your default value spot for the
2nd
> > parameter.
> > >
> > > Hope that helps (and works! :) )
> > > - T
> > >
> > > "G" wrote:
> > >
> > > > I want to default one of my report parameters to a value passed in
via
> > the
> > > > URL. How do i reference a URL variable in the report designer?
> > > >
> > > > TIA,
> > > > Brian
> > > >
> > > >
> > > >
> >
> >
> >|||I think that you have the concept of how to do this not quite right. You are
not wanting to reference the variable passed on the url, you want the url to
set the report parameter you have already defined. Steps to get this
working. First create a report with report parameters and make sure the
report is working.
Easiest is just have a blank report with two text boxes. Set the textboxes
as an expression. Using the expression builder you can set it to you
parameter. Open up the report, you will be prompted for a parameter. Fill it
in and make sure the parameter shows up on your report. Now try it via a
URL.
Bruce L-C
"G" <brian.grant@.si-intl-kc.com> wrote in message
news:O5yEaYTWEHA.4056@.TK2MSFTNGP11.phx.gbl...
> That seems ridiculously complicated for something that should be common
> practice. Passing a URL variable into a report and manipulating that
> variable has to be a trivial task.
> I must be doing something wrong, but not a clue what.
>
> > Hmm... Might be that parameters can't control parameters in the same
> report? Quick workaround might be to have a "shell" report that brings in
> the URL parameter, then have your main report as a subreport in the shell
> (taking up the entire space, so it's transparent to the end user) and pass
> the second parameter based on the outer first?
> >
> > Did that make any sense?
> > - T
> >
> > "G" wrote:
> >
> > > Thanks for your help Teros. I think I tried what you are suggesting,
but
> > > everytime i run the report, passing in the URL variable never seems to
> have
> > > any affect on the value.
> > >
> > > Here's what i got:
> > >
> > > Parameter1: This is the variable that i will want to change with a URL
> > > variable, default value is blank, no prompt.
> > > Parameter2: Changeable parameter on the report, defaults to
> > > Parameter1.value.
> > >
> > > Then when I call the report, i try passing in a value for Parameter1:
> > > http://127.0.0.1/ReportServer?ReportName&Parameter1=22
> > >
> > > The report comes up with Parameter2 still showing blank.
> > >
> > > Brian
> > >
> > >
> > > "Teros" <Teros@.discussions.microsoft.com> wrote in message
> > > news:9A646724-4C92-464B-A4C4-6BE2C6F7A98A@.microsoft.com...
> > > > If you have your url such as:
> > > >
> > > > http://127.0.0.1/ReportServer?ReportNameX&categoryY=22
> > > >
> > > > Where ReportNameX is the report and categoryY is your parameter, you
> > > should be able to reference it within your report by setting up a
> > > coresponding parameter named categoryY and then using the usual
> > > Parameters!categoryY.Value . So to have it default that value for a
> second
> > > parameter, I would think you'd set up your URL passed parameter, then
> call
> > > that with the Parameters!blah.value in your default value spot for the
> 2nd
> > > parameter.
> > > >
> > > > Hope that helps (and works! :) )
> > > > - T
> > > >
> > > > "G" wrote:
> > > >
> > > > > I want to default one of my report parameters to a value passed in
> via
> > > the
> > > > > URL. How do i reference a URL variable in the report designer?
> > > > >
> > > > > TIA,
> > > > > Brian
> > > > >
> > > > >
> > > > >
> > >
> > >
> > >
>
Subscribe to:
Posts (Atom)